Blisstool LTC64 Guía de usuario descargar pdf (Pagina 37)

11. Main differences in the control and the power of v4

and v5 of BLISSTOOL LTC64X (THE BEAST)

v4 and v5 have the same knobs and switches as v3, v2i, v2 and v1, but because of

the many improvements and new features of v4 and v5, their potentiometer

FREQUENCY (for v4 and v5) and switch AUTO ZONES (only for v5) have a dual

function, i.e. they have a second, additional function, only available in v4 and v5.

Thanks to this second, additional function of potentiometer FREQUENCY and switch

AUTO ZONES, at v4 and v5, in an elegant way, there is provided a quick and

convenient access to the new features available in v4 and v5, without the need of

adding other knobs and switches.

Moreover, v5 is with extreme extended discrimination range and with improved

distribution of the three areas for discrimination, selectable by switch

DISCRIMINATOR.

The main differences in the control and the power of v4 and v5 of BLISSTOOL LTC64X

(THE BEAST), compared to v3, v2i, v2, v1, are described below:

11.1. Potentiometer FREQUENCY of v4 and v5

- At v3, v2i, v2 and v1, potentiometer FREQUENCY has only one function:

/1/ Change of the operating frequency of the metal detector in range +-60Hz, in order to

avoid external electromagnetic interferences. The metal detector always work in NORMAL

mode of the transmitter with normal transmitted power. The basic operating frequency of the

metal detector is just one: 8.0KHz for v3, v2i, v2, and 8.5KHz for v1.

- At v4 and v5, potentiometer FREQUENCY has two functions:

/1/ Change of the operating frequency of the metal detector in range +-600Hz, in order to

avoid external electromagnetic interferences and/or in order to switch between the two base

operating frequencies: 8.0KHz and 7.4KHz. With setting FREQUENCY = MAX, the metal

detector works with base operating frequency 8.0KHz, but with setting FREQUENCY = MIN, the

metal detector works with base operating frequency 7.4KHz. By turning the potentiometer

FREQUENCY from level MAX to level MIN, provides smooth regulation of the operating

frequency from 8.0KHz to 7.4KHz;

/2/ Switch between NORMAL and TURBO/BOOST mode of the transmitter and smooth

regulation of the transmitted power of the transmitter: with setting FREQUENCY = MAX, the

metal detector works in NORMAL mode of the transmitter, i.e. with normal transmitted power,

but with setting FREQUENCY = MIN, the metal detector works in TURBO/BOOST mode of the

transmitter, i.e. with increased transmitted power. By turning the potentiometer FREQUENCY

from level MAX to level MIN, provides smooth regulation of the transmitted power of the

transmitter from NORMAL to TURBO/BOOST power.

Because of the combination in v4 and v5 of the above-described two functions of

potentiometer FREQUENCY:

- with setting FREQUENCY = MAX, v4 and v5 work with base operating frequency

8.0KHz and NORMAL mode of the transmitter with normal transmitted power;

- with setting FFREQUENCY = MIN, v4 and v5 work with base operating frequency

7.4KHz and TURBO/BOOST mode of the transmitter with increased transmitted

power;

- by turning the potentiometer FREQUENCY from level MAX to level MIN, provides smooth

regulation of the operating frequency from 8.0KHz to 7.4KHz and of the transmitted power of

the transmitter from NORMAL to TURBO/BOOST power;

- by turning the potentiometer FREQUENCY from level MIN to level MAX, provides smooth

regulation of the operating frequency from 7.4KHz to 8.0KHz and of the transmitted power of

the transmitter from TURBO/BOOST to NORMAL power.

Usually, mode TURBO/BOOST provides several centimeters better depth of detection

versus mode NORMAL. Moreover, in TURBO/BOOST mode, the metal detector is more

BLISSTOOL LTC64X - User Guide (version EN201505131231) Page 37 of 62

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 61 62

Comentarios a estos manuales

Sin comentarios

Blisstool LTC64 Guía de usuario Pagina 37

Comentarios a estos manuales